192.168.0.1

192.168.0.1 – 192.168.o.1 is a default IP address used by routers such as TP-Link, D-Link, NETGEAR to login admin panel settings at http://192.168.0.1.

192.168.0.1 Login

192.168.1.1 Login

By accessing the web management page you will be able to make changes to Wireless Settings (Network Name SSID, Change WiFi Password), Create Guest Networks, MAC Filtering, Access/Parental Control, and various other settings.

How to login to 192.168.0.1?

To log in to the 192.168.0.1 admin panel, follow these steps:

  1. Open the web browser that you use to access the internet.
  2. Click http://192.168.0.1 or type 192.168.0.1 and press Enter.
  3. A login page or popup will appear.
  4. Enter “admin” for username and “admin” for password. (List of default router passwords)
  5. You will now be logged in to the admin panel.
Note: Make sure you are typing the IP address correctly, don’t use “www”, “https” at the beginning of URL or misspelled value such as 192.168.o.1. An IP address always consists of numerical digits and not alphabets.
 

How to change router’s WiFi password or SSID?

Changing the default router password is the first step in securing your WiFi network from intruders. Although the process of changing the router password varies from router brands, the overall concept is the same so you can take the guidance from the following steps to get the basic idea.

Change WiFi Password:

  1. Open a web browser and enter the IP address of your router such as 192.168.0.1 or 192.168.1.1.
  2. Login to the web-based admin interface using your username and password. Most routers have a default username of admin and password of admin/password.
  3. Locate Wireless Settings and navigate to the Wireless Security page.
  4. If not already, turn on the “WPA/WPA2” security option, and in the Password field enter the password of your choice.
  5. Now click Save to apply the changes.

Once the changes are applied your router will reboot automatically and your WiFi will get disconnected. Use the new WiFi password as specified to re-connect to the network.

Change Network Name (SSID):

  1. Open your browser and type in http://192.168.0.1 in the address bar.
  2. Enter the username and password when prompted. For most routers, the default username is admin and the password is admin / password.
  3. Select Wireless and click the Wireless Settings.
  4. In the Wireless Network Name (SSID) enter as preferred. 
  5. Click the Save button to save the settings.
 

Unable to access 192.168.0.1

If you are unable to access 192.168.0.1 or the browser gives an error then it may be due to one of the following reasons:

Ensure you are connect to WiFi

The web-based management page does not require an active internet connection however you must be connected to the WiFi so you can log in through your desktop computer, smartphone or tablet.

Recheck the IP Address

It may be that the default gateway address of your device may be other than 192.168.0.1. Try finding out the default gateway address for your device and try accessing it on that IP address.

Clear browsing data

Clear your browser cache and cookies and try again.

  • Google Chrome: Open settings from top right > More Tools > Clear Browsing Data > Clear Data.
  • Mozilla Firefox: Settings > Preferences > Privacy & Security > Cookies and Site Data > Clear Data > Clear.
  • Safari: Preferences > Privacy > Manage Website Data > Remove all.

Update your browser

If you are using a low version web browser you may face incompatibility issues which is why it is recommended to upgrade your browser as well as your router firmware for proper access.

During network configuration some settings may have been done improperly as a result you are unable to log in to your router settings page (Web/Blue GUI). The most straightforward fix for this is to perform a router reset which will revert back all the personalized changes you may have made to default settings. 

To initiate a factory reset simply push the small RESET button at the back of your router using a safety pin or toothpick for 5-10 seconds when you see the SYS LED lights blinking on the front panel it means the reset is completed.