Converge Router Login

Converge router gateway allows you to change WiFi password, SSID, and other default settings for Huawei, FiberHome, ZTE, and Cisco modems.

Choose your router brand:

How to Change Converge WiFi Password and SSID?

Note: The default gateway IP address, username, and password will be printed on a sticker on the back of your router.

Huawei

  1. Open a browser and type 192.168.100.1 in the address bar.
  2. Enter Username and Password and click Login.

    Username: root
    Password: adminHW

    Username: telecomadmin
    Password: admintelecom or Converge@huawei123

  3. Now, go to WLAN > 2.4G / 5G Basic Network Settings.
  4. Enter your WiFi Network Name in the SSID Name field and your WiFi password in the WPA PreSharedKey field.
  5. Click on Apply to save the changes.

Fiberhome

  1. Open a browser and type 192.168.1.1 in the address bar.
  2. Enter Username and Password and click Login.

    Username: user1 or user2
    Password: 12345 or user1234 or user12345

  3. Once logged in, go to the Wireless section.
  4. Here, in the SSID field, enter the new WiFi SSID, and in the WPA Pre-Shared Key field, enter the new WiFi Password.
  5. Click on the Save button to save the changes.

ZTE

  1. Open a browser and type 192.168.1.1 in the address bar.
  2. Enter Username and Password and click Login.

    Username: user
    Password: user

    Username: admin
    Password: Converge@zte123

  3. Go to the Network > SSID Settings and enter the new WiFi Network Name in the SSID field and click on the Submit button.
  4. Go to Network > Security and enter the new WiFi Password in the WPA Passphrase field and click on the Submit button to save the changes.

Cisco

  1. Open a browser and type 192.168.0.1 in the address bar.
  2. If you are logging in to the Cisco Gateway / Admin Portal for the first time, keep the User Name and Password blank and click Log In.
  3. Go to Setup > Quick Setup and enter your WiFi password in the Pre-Shared Key.
  4. Enter your WiFi name in the Wireless Network Name (SSID) field.
  5. Click Save Settings to apply the changes.