Dsldevice.lan is the web-based user interface to change Wi-Fi password, Network Name (SSID), and default router settings at http://dsldevice.lan.
How to login to Dsldevice.lan?
- Open a browser and type http://dsldevice.lan in the address bar.
- Enter the Username and Password and click Login.
- You will be logged in to the router settings.
Note: The IP address, Username, and Password are printed on a sticker on the back of the router.
Default Username and Password
| Username: Password: | admin admin |
| Username: Password: | admin (Check router label) |
| Username: Password: | admin password |
| Username: Password: | admin (Leave it blank) |
How to change your Wi-Fi Password and Network Name?
- Log in to the router’s settings.
- Go to Wireless, WLAN, or Wi-Fi Settings.
- Enter the Wi-Fi Network Name in the Network Name (SSID) field.
- Enter the Wi-Fi Password in the Wi-Fi Password/Passphrase/Pre-Shared key field.
- Click Save/Apply.
If you have a dual-band router, you need to configure both the 2.4 GHz and 5 GHz network settings.
Each router brand and model has a slightly different process for changing the wireless settings. You can view all router brands here to search for specific instructions.
Can’t connect to Dsldevice.lan web address?
- To access http://dsldevice.lan, your device must be connected to the router’s Wi-Fi network or via an Ethernet cable. Please check your network connection and try again.
- Try accessing the default IP address of your router such as http://192.1686.1.1, http://192.1686.0.1, or http://192.168.1.254. The IP address can be found in your Wireless & Networks or Wi-Fi settings of your device.
- If you are using a VPN connection or a customized IP range, learn how to find the router IP address and type http://<ipaddress>.
- Clear browsing data and cookies and try again. You can also try to access http://dsldevice.lan on a different web browser.
- A factory reset will revert your router to default settings. Press and hold the Reset button for about 3-5 seconds, you will see the LEDs flashing. Release the reset button and wait for the router to reboot to factory default settings.