TP-Link Router Login

By logging to your TP-Link router settings page you will be able to change the password of your WiFi network and other settings such as SSID, LAN, and WAN Settings.

192.168.1.1 Admin

192.168.0.1 Admin

Before you can log in, you need to have the following:

  • A TP-Link Router
  • A PC/Laptop/Mobile/Tablet connected to the TP-Link WiFi network.

Here is how you can log in to the TP-Link Router Admin Panel and change desired settings:

  1. The first thing is to connect your device to the TP-Link Network, either wirelessly using the WiFI network or using an Ethernet cable.
  2. Once connected, open a web browser and in the address bar, type http://tplinkwifi.net/ or you can use the Router’s IP address http://192.168.0.1 or http://192.168.1.1 to login instead of tplinkwifi.net.
  3. Once the login page appears, you will be asked to enter the login credentials
  4. Enter admin for username and password for password. In case you have changed the login password then enter as configured. You can find the default TP-Link login username and password on a label at the side or underneath the TP-Link Router.
  5. If the login details are correct, you will be logged into the TP-Link Admin interface. From there you can change different settings of your router including the password of your WiFi network and also the password of your Router Login.

How to change the password of the TP-Link WiFi Network?

Changing the password of the TP-Link WiFi network is important because any new router that you buy uses the default credentials for your WiFi including default WiFi SSID and Password. So you should change the password of your WiFi network to keep it secure. Here is how you can change the password of your TP-Link WiFi network:

  1. Log in to the Admin Panel of your TP-Link Router.
  2. Once logged in, go to Wireless ->Wireless Security.
  3. Scroll down to the WPA-PSK/WPA2-PSK section.
  4. In the PSK Password field, type your new Wi-FI Password. (8-63 characters, including alphabets, digits, and special symbols)
  5. Now, click on Save to save the changes and reboot your router.

How to change the TP-Link Login password?

Your Admin Panel holds the key to all the settings of your router and it is important that you change the login password of your Admin Panel, otherwise, anyone connected to your network can change the login password and mess up the settings of your Router and you will have to reset your router to factory defaults. To avoid all this, here is how you can change your TP-Link Login Password:

  1. Log in to the Admin Panel of your TP-Link Router.
  2. Once logged in, go to Management->Access Control->Password.
  3. There, enter your old password and then enter your new password & re-enter it again for verification.
  4. Click on Save/Apply to save the changes.